Change Currency: GBPUSDEUR

Change Language: DeutschEnglish (UK)English (US)EspañolFrançaiseעברית (ישראל)Dutch

Ezi–TileFix 500ml Refill


Product Information

Ezi-TileFix adhesive is the Ezi way to fix hollow floor & wall tiles internally or externally without the need to remove or replace the tiles and without damaging any of the surrounding tiles in 3 Ezi steps.


0.5 ltr of Ezi-TileFix adhesive should fix approx 2-3 m2 of hollow tiles. Depending on the severity of the problem more or less Ezi-TileFix adhesive may be needed.

Step 1
Clean the affected tile and the grout around the tile and the surrounding tiles then very carefully drill a hole in the grout in the middle of a tile joint with the supplied 2mm drill bit to the depth or bottom of the affected tile, avoid damaging the edges of the tiles. Depending upon the size of the repair a hole in each joint around the tile may be needed.
Step 2
Next use a brush to carefully collect the grout dust and put it somewhere safe, or if you have some grout to match the existing grout you can use a vacuum to clean up the grout dust, then half fill the supplied applicator bottle with Ezi-TileFix adhesive being careful not to spill any. Then place the applicator tube nozzle into one of the holes you have drilled in the grout and gently squeeze the applicator allowing the adhesive to flow under the tile, remove the nozzle and check that the adhesive is flowing under the tile and repeat until the space below the tile is filled completely. Depending upon the severity of the problem you may have to repeat this step a few times in order to ensure the adhesive has flowed under the tile and completely filled the space below the tile. If the adhesive will not flow under the affected tile try one of the other holes around the affected tile, if the problem persists then repeat step 1 and carefully drill a new set of holes in the grout.Then clean any excess adhesive around the holes in the grout around the affected tile with a damp sponge and pour any remaining adhesive back into the Ezi-TileFix bottle and then store in a cool dry place (avoid freezing) out of the reach of children. Please note that we cannot accept responsibility for any damage caused by excess adhesive not being cleaned off the affected tile surface properly after usage. After use flush out the applicator bottle, tube and nozzle with clean water ready for reuse.
Step 3
After 24 hours check there are no hollow spots under the tile, if any hollow spots are found repeat step 2 If no hollows spots are found mix some grout to match the existing grout and repair the holes in the grout, or mix a small amount of Ezi-TileFix with the grout dust you saved in step 1 and form a paste to repair the holes in the grout around the repaired tile.

Product Contents
Ezi–TileFix is a dispersion polymer of carboxylated styrene butadene copolymer, synthetic Latex based Bonding agent supplied in a milky white liquid form containing Vinyl Acetate Homopolymer and Methanol store in a cool, dry place out of childrens reach, contain spills with inert absorbent material and transfer to containers for disposal, keep away from drains, sewers, or wayer systems.

Safety & First Aid
Wear appropriate protective equipment and avoid contact with skin when handling and using this product. First aid measures if in eyes flush with water for 20 minutes and seek medical attention, on skin wash with soap and water if irritation developes or persists seek medical attention. If vapours inhaled move outside tofresh air if symptoms develope or persist seek medical attention. If swallowed drink 2 glasses of water DO NOT induce vomiting seek medical attention immediately.


Product Code: EZIK6NY896

Customer Reviews

This product hasn't been reviewed yet. Write a review


Copyright © UK Ceramics & Stone Ltd All Rights Reserved
Company Number: 07057002  –  VAT Registration Number 982030826

Mobile Site

UK Ceramics & Stone Ltd Tile-Supplies uses cookies. For more detailed information about these cookies please see our privacy policy. Please accept to continue or block all non-essential cookies.

I accept cookies from this site.